The Aerohive HiveAP 170 is a durable, enterprise-grade, high performance (2×2) MIMO solution, specially designed for outdoor high-bandwidth-demand wireless deployments in harsh environments.
AEROHIVE NETWORKS HiveAP 170 is a high-performing, cost-effective and rugged 802.11n outdoor access point. The HiveAP 170 provides high-performance dual concurrent (2.4GHz and 5GHz) 802.11n (2×2) MIMO as well as a 10/100/1000 Ethernet port.
The HiveAP 170 is an enterprise-grade, high performance (2×2) MIMO solution, designed for high bandwidth demand outdoor wireless environments. With extended temperature range and a watertight chassis the AP 170 can deployed in most every outdoor environment on earth. The HiveAP with four antennas and the ability to provide service concurrently on both 2.4Ghz and 5Ghz bands the HiveAP 170 provides both high speed mesh and support for 802.11n as well as legacy 802.11a, b, and g clients, through Aerohive’s industry unique and resilient controller-less architecture.
Features & Benefits
Flexible Hardware Platform
- Two radios provide concurrent 802.11a/n and 802.11b/g/n connections with no degradation in performance
- Automatic or dedicated mesh backup
- Supports 802.3at PoE or standard power adapter
Security
- Trusted Platform Module (TPM)–Hardware-based key storage and encryption
- Wireless privacy & authentication Wi-Fi CERTIFIED™ WPA™ and WPA2™, 802.11i, WEP, 802.1x, PSK
- Granular user profile-based management defines QoS, mobility policies, and security policies for each user that enters the network
- Encryption: AES:CCMP, TKIP, and RC4 (WEP only)
- Marking and policing–WMM™ (802.11e) for wireless, 802.1p and/or DiffServ
- Wi-Fi CERTIFIED WMM
- WMM power save (U-APSD)
Specifications
Included Mounting Options
- Wall Mount
- Pole Mount 1 to 2.5 inches in diameter
Radio Specifications—802.11a
- 5.150–5.950 GHz Operating Frequency
- Orthogonal Frequency Division Multiplexing (OFDM) Modulation
- Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11b
- 2.4–2.5 GHz Operating Frequency
- Direct-Sequence Spread-Spectrum (DSSS) Modulation
- Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
Radio Specifications—802.11g
- 2.4–2.5 GHz Operating Frequency
- Orthogonal Frequency Division Multiplexing (OFDM) Modulation
- Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11n
- 2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency
- 802.11n Modulation
- Rates (Mbps): MCS0–MCS15 (6.5Mbps – 300Mbps)
- 2×2, Multiple-In, Multiple-Out (MIMO) Radio
- HT20 and HT40 High-Throughput (HT) Support
- A-MPDU and A-MSDU Frame Aggregation
Antennas
- 4x N-type jack antenna connections for external antennas
- Antennas sold as accessory
Interfaces
- Autosensing 10/100/1000 Base-T Power over Ethernet (PoE) capable (802.3at) Ethernet Port
Physical
- LxWxH: 9 5/8 x 7 7/8 x 3 in. w/ locking hole extensions
- LxWxH: 8 13/16 x 7 1/8 x 2 3/4 w/o locking hole extensions
- 4.3 lbs, 6.05 lbs w/antennas and brackets
Environmental
- Operating: -40 to +55°C, Storage: -40 to +80°C
- Humidity: 95%
Environmental Compliance
- IP 68
Power Options
- 802.3at Power over Ethernet (PoE) port
Power Specification
- IEEE 802.3at PoE Power
- 48V, 06.25 A (Pre-802.3at)
- RJ-45 power input pins: Wires 4, 5, 7, 8 or 1, 2, 3, 6